Panasonic FV-08VQL3 Installation Instructions Manual page 12

Installation
III
7. Secure installation bracket I and IV to the fan body using
short screw I (M4X12) and short screw II (M4X10).
8. Slide the circular duct onto the adapter and secure with
tape.Remove the junction box cover and secure conduit
to junction box knockout hole.(7/8 inch)
Refer to wiring diagram on page 6.
9.
Using wire nuts, connect house power wires to ventilating
fan wires:
Black to blacks; white to whites; green to greens.
Replace junction box cover.
CAUTION:
Mount junction box cover carefully so that lead wires
are not caught.
10. Finish ceiling work. Ceiling hole should be cut at the edge
of the frame.
(Between joist mounting installation) continued
(Fig. 22)
Short screw II
Installation bracket IV
(Fig. 23)
(Fig. 3)
(Fig. 24)
Ceiling
12
Installation bracket I
Short screw I
Adapter
Flange
235
(9.25)
Ceiling joist
Fig. 22
Circular duct
Conduit
Junction box cover
Fig. 23
Fig. 24