Panasonic FV-08VQL3 Installation Instructions Manual page 7

Installation (Joist mounting installaton) continued I
IMPORTANT:
Make sure that body "Claws" are properly inserted
into adapter slots.
In case body and blower are installed separately.
Remove 3 screws.
(Fig.6-1)
Remove blower section.
(Fig.6-2)
Insert fan body into ceiling.
(Fig. 5)
Mount blower section
and fix with 3 screws.
(Fig.6-3)
IMPORTANT:
Make sure that frame is
properly inserted into
groove of blower section.
Screws
Fig. 6-1
Blower section
Frame section
Fig. 6-2
Frame section
Frame
section Blower
Groove
Fig. 6-3
7. Insert fan body into ceiling.
Adapter slots Claws
8. Secure fan body to adapter using two thumb screws.
Ceiling
7
Tape
Duct
Body
Claws
Thumb screws
(Fig. 5)
Ceiling
Fig. 5
(Fig. 7)
Fig. 7