2-3. Trackball Control Panel
2-3-2. Removing of Cabinet
1. Trackball Panel (Top)
Remove five screws (BVTP3 x 8) and remove the track
ball panel (top).
BVTP3 x 8
2-24
Trackball panel (top)
Trackball
panel
2. Trackball Panel
(1) Remove five screws (BVTP3 x 8) and remove the
trackball panel (Top). (Refer to section 2-3-2-1.)
(2) Remove the board assembly from the trackball panel.
(3) Disconnect the connector of connection cord (USB)
from the connector (CN100) on the CPU-316 board,
then remove one screw (PWH3 x 5) and remove the
earth terminal.
(4) Remove two screws (BVTP3 x 8) and remove the
USB bracket from the trackball panel.
(5) Remove the connection cord (USB) from the trackball
panel.
(6) Peel the base sheet from the trackball panel to remove
it.
Earth terminal
PWH3 x 5
CN100
Board
assembly
CPU-316
board
BVTP3 x 8
USB bracket
Connection
cord (USB)
Trackball panel
Base sheet
DMW-S01NL/S02NL/ST001