Removal Of Cabinet - Sony DMW-S01NL Maintenance Manual

2-4-2. Removal of Cabinet

1. Knob Case (Top)
(1) Remove eight encoder knobs.
(2) Remove two screw covers and two screws (BVTP3 x 8),
then remove the knob case (bottom) assembly.
(3) Remove three screws (P3 x 4) and remove the knob
shield (top).
(4) Remove three screws (BVTP3 x 8) and two screws
(P3 x 4), remove the encoder assembly.
(5) Disconnect the connection code (USB) and harness
from the connectors (CN101, CN209) on the CPU-319
board.
(6) Remove the screw (BVTP3 x 8) and remove the PWB
support and KEY-48 board.
(7) Remove the connection cord (USB) and knob shield
(bottom) from the knob case (top).
DMW-S01NL/S02NL/ST001
Knob case (bottom) assembly
P3 x 4
Encoder
assembly
Encorder
knobs
2-4. Media Bar Control Panel
Knob shield
(top)
BVTP3 x 8
CN101 CN209
P3 x 4
CPU-319
board
Knob shield
(bottom)
Connection
cord (USB)
Harness
BVTP3 x 8
KEY-48
board
PWB support
Knob case
(Top)
BVTP3 x 8
Screw covers
2-27