Power Cord - Sony DMW-S01NL Maintenance Manual

1-2. Power Supply

1-2-2. Power Cord

w
. The power cord is not supplied with the DMW-S01NL/
DMW-S02NL/DMW-ST001.
Be sure to use the power cord that is applicable to places
in the area as shown below.
To avoid a fire or an electric shock, be sure to use the
designated power cord.
. Do not damage the power cord.
Otherwise, a fire or electric shock may result.
w
This warning is applicable for USA only.
If used in USA, use the UL LISTED power cord specified
below.
DO NOT USE ANY OTHER POWER CORD.
Plug Cap : Parallel blade with ground pin
(NEMA 5-15P Configuration)
Cord : Type SJT, three 18 AWG wires
Length : Less than 2.5 m (8 ft. 3 in.)
Rating : Minimum 10 A, 125 V
Using this unit at a voltage other than 120 V may require
the use of a different line cord or attachment plug, or both.
To reduce the risk of fire or electric shock, refer servicing
to qualified service personnel.
1-2
1. DMW-S01NL/DMW-S02NL and AC Adaptor
Items USA/CANADA
Receptacle IEC320
Straight
Plug NEMA 5-15P
Cord type SJT
3 x 18 AWG
Minimum rating 10 A/125 V
Length 1500 mm~
2400 mm
Safety approval UL/CSA
2. DMW-ST001
Items USA/CANADA
Receptacle IEC320-C13
Right angle
Plug NEMA 5-15P
Cord type SJT
3 x 18 AWG
Minimum rating 10 A/125 V
Length 1500 mm~
2400 mm
Safety approval UL/CSA
EUROPE UK
IEC320 IEC320
Straight Straight
CEE7type BS1363
HAR HAR
3 x 1.00 mm 2 3 x 1.00 mm 2
10 A/250 V 10 A/250 V
1500 mm~ 1500 mm~
2400 mm 2400 mm
HAR BSI, BASEC
EUROPE UK
IEC320-C13 IEC320-C13
Right angle Right angle
CEE7type BS1363
HAR HAR
2 2
3 x 1.00 mm 3 x 1.00 mm
10 A/250 V 10 A/250 V
1500 mm~ 1500 mm~
2400 mm 2400 mm
HAR BSI, BASEC
DMW-S01NL/S02NL/ST001