DANGER
Lack of EMERGENCY-STOP Switch
According to DIN EN 50156-1, installation of an EMERGENCY STOP
switch / EMERGENCY STOP device is required.
It is the responsibility of the operator to install an EMERGENCY STOP
Emergency shut-down devices must meet the following requirements:
V01 /11-046
button.
They must be located in an easily accessible, safe place outside the
room in which the BEKOKAT
and marked according to the intended use.
The switch to trigger the emergency shutdown must be a red switch
on a yellow background.
Installation and Operation Manual BEKOKAT
®
is installed or along the escape route
®
51 / 88