Toro Groundsmaste 3200 Series Installation Instructions Manual page 20

8
Installing the Serial Plate
For Germany Only
Parts needed for this procedure:
1 Serial plate
1 Serial plate tape
Procedure
1. Stamp the serial number into the frame.
The text size must be 7 mm (1/4 inch) or larger.
2. Stamp the appropriate information into the serial
plate.
3. Wipe down the bottom of the frame and serial
plate with an alcohol-based wipe (Figure 43).
1. Clean the bottom of the
2. Serial plate
4.
5.
20
Figure 43
frame.
Apply the tape to the serial plate.
Install the plate to the frame
Use the dimensions shown in
g304286
3. Front of the machine
(Figure 44).
Figure 45.