Ru Installation; Installation Prerequisites - Fujitsu 5GRUDB3 User Manual

Installation

RU Installation

4.5
RU Installation
In this section:
4.5.1

Installation Prerequisites

4.5.2 Attach L-Brackets and Eye Bolts
4.5.3 Attach RU Mounting Adapter Plate
4.5.4 Attach RU to Pole
4.5.5 Attach RU to Wall
The following procedures describe how to install the RU.
Note: All hardware is stainless steel that will not corrode.
Note: Use care when handling the RU, as it is heavy. Fujitsu recommends installing the RU on a two-person team
to avoid damage to the unit or injury to the user. If the RU is to be installed at a high location, Fujitsu
recommends using lifting equipment to hoist the RU by a pair of eye bolts mounted on the RU.
4.5.1
Installation Prerequisites
Installation requires the following basic tools and accessories:
■ Power cable
■ Optical cable
■ RF cables
■ RET cable
■ Frame ground cable
■ SFP
■ Torque wrench
■ Torx ® screwdriver
■ Metric and SAE toolkit
■ Screw drivers
■ Wire strippers
·
Issue 1.1, May 2021
Release 1.0
95
Fujitsu and Fujitsu Customer Use Only