4-1B. Reference Cf Detection Adjustment (Pal); 4-2B. Component Y Level Adjustment (Pal) - Panasonic AJ-SD93P/E Service Manual

4-1b. Reference CF Detection
Adjustment (PAL)
BOARD AVIO (F4)
TP
TP421, TP422
ADJ.
VR302
INPUT
SDI INPUT : 100% Color Bar
MODE
HD SDI IN : 1080/59i Color Bar
TAPE
EE
M. EQ
Oscilloscope
SPEC.
A=B ± 5%
<Setup Menu>
070 --------- TV SYSTEM 625
1. Expand the pulse portion of TP422.
2. Adjust VR302 so that the widths A and B are
equal as shown below.
Torigger
CF OUT
(GS)
TP422
Expand this portion.
TP422
TP421
A
1. Make sure that the phase between the CF pulse
from the signal generator and TP420 is as shown
below.
Torigger
CF OUT
(GS)
Torigger
Waveforms differ
depending
TP420
B
on
4-2b. Component Y Level
Adjustment (PAL)
BOARD AVIO (F4)
TP
Y OUT
ADJ.
VR202
INPUT
SDI INPUT : 100% Color Bar
MODE
EE
TAPE
-----
M. EQ
WFM
SPEC.
Video (V) = 714mV±3mV
<Setup Menu>
070 --------- TV SYSTEM 625
1. Adjust VR300 so that the video level (V) is in the
specification.
Y OUT
Video Level (V)
4-3b. Component Y Level
Adjustment (PAL)
BOARD AVIO (F4)
TP
PB/PR OUT
ADJ.
VR201 (PB), VR200 (PR)
INPUT
SDI INPUT : 100% Color Bar
MODE
EE
TAPE
-----
M. EQ
WFM
SPEC.
PR /PR = 1009mV±3mV
<Setup Menu>
070 --------- TV SYSTEM 625
1. Adjust VR201 and VR200 so that the PB and PR
levels are in the specification.
PB OUT
PB/PR
Level
ELE-8
PR OUT