Panasonic AJ-SD93P/E Service Manual page 42

12-2-5. PLD Version Upgrade Procedure [SERVO IC]
This Model uses PLD on the SERVO Board. At the time of a version upgrade, use the special tool, connect to PLD
Connector on the SERVO Board, and use the PLD writing software as shown table 12-1A-1.
1. Preparation
ITEM
CPLD WRITER
D-sub 25pin-25pin Cable
Version Upgrade
Software
File NAME
Personal Computer
2. Connection
1. Connect the D-sub Cable between CN201(for ALTERA) connector of the CPLD WRITER (VFK1590) and
Personal Computer (Printer port).
2. Connect the CPLD WRITER Cable (VFK1590P2) between P201(for ALTERA) connector and P250 connector
on the SERVO Bord in the VTR as shown in figure 12-2E-2 and table 12-2E-3.
3. Turn on the VTR and Personal Computer (Windows mode).
Standard Accessory:
VFK1590P1, VFK1590P2,
VFK1590P4, VFK1590P5 (5 kinds)
Note:
Individual connection
cable is available as
spare part.
AJ-SD93
IC Connection Between CPLD Writer/PC
Manufacture
Cable
ALTERA D-SUB 25Pin
Cable (Straight)
3. Boot up the Ver. up Software and Ver. up Procedure
1. Insert floppy disk (which is included all files of the
2. Select "start button" on the Windows Screen and then "Program" and then boot up the "MAX+plus
II *** programmer only" so that the following menu appears.
VFK1590, VFK1590P2 (VFK1590 standard)
Straight (Male - Female), Length : Within 1meter
MAX+plus II Software ver9.6 or over ver9.6
Access to
www.altera.com/support/software/download/sof-download_center.html
select "ASAP 2" in programming software portion in order to download it.
jcf File (Included in "
(Copy all files of the
WINDOWS 95 or 98
VFK1590P3,
P301 Connector
P401 Connector
Connector Ref. No.
CN201
REMARK
" file).
VSI4319A
which is included " *.jct " file to floppy disk)
VSI4319A
Table 12-2E-1
P201 Connector
P501 Connector
P1 Connector
D-SUB 25 Pin
ｽﾄﾚｰﾄｹｰﾌﾞﾙ ｽﾄﾚｰﾄｹｰﾌﾞﾙ ｽﾄﾚｰﾄｹｰﾌﾞﾙ ｽﾄﾚｰﾄｹｰﾌﾞﾙ
CN1 D-SUB Connector
CN201 D-SUB Connector
CN301 D-SUB Connector
CN401 D-SUB Connector
Figure 12-2E-2
Connection Between CPLD Writer/SERVO Board
Cable Part No.
VFK1590P2
Table 12-2E-3
) to floppy drive.
VSI4319A
INF-29
VFK1590
CPLD Writer
PC
CPLD Ref. No. Connector on
SERVO Board
P201
and
P250