An712 Module Ras Display Operation - Toshiba V Series User Manual

3.2Tool Setting and Operation
3.2.3

AN712 module RAS display operation

On the Product view screen select the station that includes the AN712 module you wish
to operate, to open the System View screen
After selecting the [Main slot No.] cell for the AN712 module, select [Tool (T)] to open the
menu for operation with the AN712 module.
3
The menus peculiar to the AN712 module are described below.
(1) Scan transmission healthy map
Select [AN712 module] on the System View screen, then select [ADMAP scan healthy]
under [Tool (T)] to open the following screen.
Click [Start] to show the talker status of the current scan transmission block and healthy
status.
17
6F8C1048