ABB LevelMaster 7100 Quick Start

Figure 1: Slide components into the LevelMaster casing
Legend: # Name
1 Oil float
2 Water float
3 Top of LevelMaster
Figure 2: Local connection cable for 2018546-001 boards
Legend: # Name
1 Connect to computer with serial or USB (using
additional adapter)
2 RS-232/RS-485 converter, P/N 2100241-005
3 Cable Adapter, P/N 2100250-002
4 Connect to Level Master board, P/N 2104836-001
5 See the Notice below
NOTICE – Equipment damage. Disconnect the red wire
connector on the battery assembly when power to the
LevelMaster is turned off. Failure to do so will result in a
constant battery drain.
RS-485 termination (2018546-005 boards only)
Figure 3: Intermediate Figure 4: Last or only
sensor sensor
Figure 5: Wiring (2018546-001 boards)
Legend: # Name
1 To flow computer/remote controller or through barrier
2 First sensor
3 Last sensor
Figure 6: Wiring (Mixed board types)
Single port legacy board (2018546-005) on left. Separate port new
board (2104836-001) on right.
Contact us
ABB Inc., Measurement & Analytics
Quotes: totalflow.inquiry@us.abb.com
Orders: totalflow.order@us.abb.com
Training: totalflow.training@us.abb.com
u
Support: upstream.s pport@us.abb.com
+1 800 442 3097 (opt. 2) www.abb.com/upstream
2105836MNAA
Copyright© 2019 ABB all rights reserved
A B B M E A S U R E M E N T & A N A LY T I C S
LevelMaster 7100
Quick Start with batteryless floats
Safety and compliance information is included with the device
in the shipping packaging.
We reserve the right to make technical changes or modify the
contents of this document without prior notice. Regarding
purchase orders, the agreed upon shall prevail. ABB does not
accept any responsibility whatsoever for potential errors or
possible lack of information in this document.
Additional information
Scan the code below for product publications:
LevelMaster 7100
2 1 0 5 8 3 6 -0 0 1 ( A B ) | L E V E L M AS T E R 7 1 0 0 | 8 /2 0 1 9