Chapter 6. Buffer Memory; The Configuration Of Buffer Memory; G6F-Ad2A - LG G3F-AD3A User Manual

Chapter 6 Buffer memory
6 Buffer memory
The A/D module has buffer memory used for data exchange with CPU module. This chapter
describes the configuration and contents of buffer memory.

6.1 The configuration of buffer memory

6.1.1 G6F-AD2A

Address
Name
(decimal)
00 Channel enable
01 Output data range
Average count
02
processing enable
03 Avg. count of Ch0
04 Avg. count of Ch1
05 Avg. count of Ch2
06 Avg. count of Ch3
07 Data enable
08 Ch0 digital output value
09 Ch1 digital output value
10 Ch2 digital output value
11 Ch3 digital output value
12 Channel status
13 Ch0 error code
14 Ch1 error code
15 Ch2 error code
16 Ch3 error code
1
R/W : Read and write are both available
2
R : Read only
Description
Enable / disable channel operation
Assign the range of digital output value
Enable / disable average count processing
per each channel
Assign the count of Avg. processing of Ch0
Assign the count of Avg. processing of Ch1
Assign the count of Avg. processing of Ch2
Assign the count of Avg. processing of Ch3
Make enable the new setting of buffer 0 ~ 6
Digital output value of channel 0
Digital output value of channel 1
Digital output value of channel 2
Digital output value of channel 3
Indicate run/stop of each channel
Shows error code when an error occurred
on channel 0
Shows error code when an error occurred
on channel 1
Shows error code when an error occurred
on channel 2
Shows error code when an error occurred
on channel 3
6 - 1
Default
Remark
value
1
h00 R / W
h00 R / W
h00 R / W
h02 R / W
h02 R / W
h02 R / W
h02 R / W
h00 R / W
2
- R
- R
- R
- R
- R
- R
- R
- R
- R
* All 16-bit data