Philips ITS4843B Installation Manual page 23

Table 1-4: Model ITS4843B, ITS4843C, and ITS4843D (Radiohead) 1.4 GHz Core Access Point
Specification
Fire Safety
Interface Connections:
LAN Input (Data): 1 Port; Ethernet 100
Base-T (only 100 Mbps Full Duplex)
LAN Cable to Network Switch
Remote Antenna UTP Cable Connectors
Remote Antenna 75 Ohm Coaxial Cable
Connectors
Local Antenna Connections (two)
Table 1-5: Model ITS4846A 1.4 GHz Remote Antenna Specifications
Specification
Physical:
Chassis (only) Dimensions (H x W x L)
Local Antenna (only) Dimensions
Weight with Antenna
Mounting
Environmental:
Operating Temperature
Storage Temperature
Humidity Range (Operating)
Humidity Range (Storage)
Altitude
Electrical:
Power
IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide
Specifications
Model ITS4843B/C/D 1.4 GHz Core Access Points are Listed for use within
"Other Spaces Used for Environmental Air (Plenum)" per NFPA70: 2011, Article
300.22.
Note: The term "plenum" as used in Article 300.22 Section C correlates with the
use of the term "plenum" in NFPA 90A-2009, Standard for the Installation of Air-
Conditioning and Ventilating Systems, and other mechanical codes where the
plenum is used for return air purposes, as well as some other air-handling
spaces. The area above dropped ceilings is an example of plenum space.
RJ-45 Female Socket.
CAT-5 or better, up to 100m (328 ft.).
Two RJ-45 Female Socket Connectors are provided to connect the UTP cables
on which 5.5 VDC power, Transmit and Receive control signals, and Antenna
Diversity signals to the remote Antennas are carried. Connectors are protected
against damage from unexpected connection to LAN with PoE
Two standard 75 Ohm connectors are provided for the coaxial cables on which
RF and DC sense signals are carried to the Remote Antenna.
Two SMA-style connectors.
30 mm x 100 mm x 174 mm
(1.2 in x 4.0 in x 6.9 in)
160 mm (6.3 inches L) Sleeve Dipole
<.32kg (0.7 lb)
Above Ceiling, Below Ceiling, or Wall Mount
o
0 to +55 C (32 to 131oF)
o
-40 to +60 C (-4 to 140oF)
o
< 95% RH @ 40 C non-condensing
o
< 90% RH @ 60 C
Operating and Storage up to 3048 m (10,000 ft)
5.0 VDC nominal input via Core AP RJ-45 Cable Connector
Value
Value
Specifications
1-13