Philips ITS4843B Installation Manual page 7

Related Documentation
IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide
Please refer to these other documents for additional installation service
information about the IntelliVue Smart-hopping infrastructure:
• IntelliVue Smart-hopping Access Point Controller Installation Guide -
provides procedures to physically install and power the IntelliVue
Smart-hopping Access Point Controller at the clinical site.
• IntelliVue Smart-hopping 2.4 GHz Access Point Installation Guide -
gives procedures to install the IntelliVue Smart-hopping 2.4 GHz AP at
the clinical site to a wall, or above or below a ceiling tile.
• IntelliVue Smart-hopping Infrastructure Installation and Service Guide
- provides complete information and procedures to install, configure,
inter-connect, and deploy the IntelliVue Smart-hopping infrastructure
at the clinical site. This document includes site planning guidelines,
procedures for use of the APC command line and graphical user
interfaces, AP configuration procedures, and APC and AP firmware
deployment procedures.
• IntelliVue Smart-hopping Sync Unit Installation Guide - lists procedures
to install the IntelliVue Smart-hopping Sync Unit at the clinical site.
• Upgrading IntelliVue Smart-hopping Access Point Controllers and
Access Points - gives procedures to use the Philips IntelliVue Smart-
hopping APC and AP Upgrade Tool to install and synchronize the
firmware version on IntelliVue Smart-hopping APCs and APs.
About This Guide
vii