Table of Contents
Advertisement
Using the air purifier
Air cleaning and purification (Automatic operation/Continuous operation)
Allergen indicator
Air quality
monitor
Operation indicators
Automatic operation
¡Select "Auto".
¡The odor sensor and dust sensor will detect the
cleanliness of the air and cause the air purifier to
operate when pollution is sensed, and to stop when
the air is clean.
¡If the air is extremely polluted, operating mode will
automatically button to "Super".
Continuous operation
¡Select "Low", "Med", "High" or "Super".
¡Select "Super" if you would like the air to be
cleaned very quickly.
¡A "beep" will sound when changing the operating mode.
Notes:
¡The AIC learning function and the AIC patrolling function may cause the air purifier to start operating even when
the air in the room is not particularly dirty. It is recommended that you set the air purifier to "Auto" mode while you
are sleeping.
Important
10
Power/Speed button
¡If not using the air purifier for a long period of time,
turn off the air purifier completely and disconnect the power plug from the wall socket.
(The air purifier will consume approximately 2.0W of power even when unit is in "Stop" mode.)
Press the Power/Speed button to
select the desired operating mode.
¡The operating mode changes as follows each time the
button is pressed: "Auto" / "AIC auto" / "Low" / "Med"
/ "High" / "Super" / Stop" (The operation indicators
light in the order shown in the diagram below.)
¡The allergen indicator will lite if AIC auto mode is chosen
(It will turn off when operation stops during automatic
operating mode.)
Operation
indicators
Allergen indicator
(lights blue)
¡When the air purifier is off, operation indicators, allergen
indicator and air quality monitor will also turn off.
Operation
indicators
Operation
indicators
Stopped(off)
(Lights green)
(Does not operate in "super" mode)
One indicator lights red
and others are off
Indicator for selected
mode lights red
Advertisement
Table of Contents
