Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 26

Detergent
case lid
Detergent case
Water
supply inlet
26
Care and Maintenance
Wipe the detergent case lid with a cloth,
when detergent or softener is caked on the
lid or the lid is dirty.
1. Lift the detergent case lid handle to open
the detergent case lid.
2. Wipe the packing on the detergent case lid with a cloth.
For heavy soil
Detach the detergent case lid from the case, when the area of the case
overlapped with the lid is very dirty, and wipe the area with a cloth.
Slide the knob of the
detergent case lid to the
right while holding the lid,
and lift the lid from the
side with projection A.
Detach the lid by
moving it to the left.
Wash the detergent case using water, when detergent or softener is
caked on the case or the case is dirty.
Clean the areas where detergent adheres, such as the detergent and
softener inlets, cap, cap openings.
Clean the water supply inlet if the water supplying time is unusually long
or "C01" appears.
1. Turn off the tap.
2. Disconnect the water supply hose.
3. Remove the water inlet fi lter.
4. Remove any debris from the water inlet fi lter using a toothbrush or similar tool.
5. Return the water inlet fi lter and the water supply hose to their original
positions.
Union nut
Projection A
Knob
Area overlapped with the detergent case lid
Detergent case Partitions
Detergent case lid Packing
Projection B
Detergent case Cap
inlet
Water filter