Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 38

Conecting the
Drain hose
38
How to Install the Washer Dryer
■ Insert the drain hose into the drain outlet.
●
If the drain outlet is shallow and the
L-Pipe comes in contact with the bottom
of the hole, cut off the L-Pipe at the
groove and reattach the L-Pipe to the
drain hose.
If you do not cut the L-Pipe or reattach
the L-Pipe, drain performance may be
degraded during the Rinse and Spin
operations, leading to incomplete rinsing
or foaming, causing the operation to stop.
Parts of the drain hose
The drain hose can shift due to forces such as the vibration or drain water
turbulence. If the drain outlet is wide or shallow, take measures to secure
the drain hose to prevent it from coming out.
■ Drain hose extension
Please use the optional extension hose.
●
Part No. BD-V9500L-005 (length approx. 83 cm)
■ Connecting the extension
●
Apply adhesive to the outer periphery of the supplied hose piece, and
attach it to the end of the drain hose of the washer dryer. Next, apply
adhesive to the outer periphery of the tip part of the hose piece, and
insert the tip part into the extension hose, thus connecting the drain
hose to the extension hose.
Wait for the adhesive to dry, and perform a trial operation.
Apply adhesive to
the outer periphery. Hose piece
Drain hose of
washer dryer
The maximum total length
of the drain hose is 5 m.
Hose
piece
Extension hose
5 m or less
Keep drain hose elevation less than 10 cm, and keep the
drain outlet clean.
●
A large amount of water may leak out when the lint filter is removed.
●
The "C02" or "C18" error code may appear.
Drain hose
L-Pipe
Apply adhesive to
the outer periphery.
Drain hose of
washer dryer
The drain hose must not be elevated more
than 10 cm when going over a threshold, and
its total length must be 2 m or less.
10 cm or less
2 m or less
CAUTION
Drain
Extension hose
Drain hose of
washer dryer