Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 27

Maintenance
of the washer
dryer
How to use the
Tub Clean program
How to use the
Tub Dry program
Clean the main body and drum whenever they are dirty.
■
External cleaning
Clean the surface of the washer dryer with a soft cloth. Do not use
solvents such as alcohol or benzine.
■
After each wash
Leave the door open for a while to dry the drum. This helps to prevent
the growth of mold and stagnant smells forming inside the washer
dryer.
■
Maintenance wash
It is recommended to run the Tub Clean program regularly. Using this
program keeps the drum clean and prevents the growth of mold.
■
This program removes odors by washing off any soap or mold that
has accumulated inside the washing drum, and then running a drying
operation for 30 minutes.
1. Press the Power button to turn on the power.
2. Press Wash button to select the Tub Clean program.
3. Press the Start/Pause button.
4. The Remaining Time indicator shows '- - -' and starts blinking, and
starts water supply. Then press the Start/Pause button to pause the
program.
5. Open the door and add the tub cleaner directly to the drum. Do not use
detergent for washing clothes.
6. Close the door and press the Start/Pause button to restart the
program.
 Tub Clean (3 hours) program

 About once a month or once every two months
 When the amount of lint on laundry is a concern
 When the odor inside the drum is a concern
 Tub Clean (11 hours) program

 When mold growth or accumulation of soap is found
 When the odor inside the drum is strong
 When you want to clean the drum thoroughly
■
This program dries the drum for 1 hour to prevent mold growth.
1. Press the Power button to turn on the power.
2. Press Dry button to select the Tub Dry program.
3. Press the Start/Pause button.
27