Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 35

Where to install
the washer dryer
10 cm or more at top
1.5 cm or more
on left side
Side with
drain hose
Front side free of
obstructions
Removing the
transport bolts
■
Install the washer dryer on a fl at hard fl oor to avoid excessive vibration
and noise.
■
Do not install the washer dryer in humid places such as a bathroom or
places that are exposed to wind and rain.
■
Keep the minimum installation distance from the walls to prevent
abnormal sound and vibration.
1.5 cm or more at rear
Area
Top
Left
Right ()
5.5 cm or
Rear
more on
Bottom
right side
 Side with drain hose (default)
Bottom
■
Install the washer dryer on a fi rm, level fl oor.
 A slippery or weak floor may cause excessive vibration and noise.
Firm, level floor
 Use the supplied spanner for removing the transport bolts.
 Retain the removed transport bolts, as you will need them in the future whenever the
washer dryer is moved.
Spanner for removing
the transport bolts
Space (cm)
10
1.5
5.5
1.5
0
When the height of the tap is less than
1200 mm, the washer dryer can still be
installed if it is installed forward or to the
side.
Weak floor
Install with the "
Transport bolt
Uneven floor
Cover cap
( UP)" mark facing up.
35