Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 5

Before, after, and during operation
 Turn on the tap and make sure there is no leakage before washing and drying.
Loose screws may result in water leakage and unexpected damage. The metal fixtures and gasket
of the tap can deteriorate and rust over long periods of use, resulting in leaks.
 Turn off the tap when not in use.
This can prevent unexpected water leakage.
 Check for leaks after tap connection whenever the washer dryer is installed or moved.
This can prevent unexpected water leakage.
 Open and close the door gently.
Failure to do so may result in injuries, damage to surrounding walls, or malfunction of the washer
dryer.
 Check and ensure that lint and other particles are not attached to the surface of the door
bellows before operating the washer dryer.
Such particles may interfere with the sealing of the door and result in water leakage.
 Do not attempt to open the door by force when it is locked.
Doing so may damage the door and lock, or result in injuries or malfunction of the washer dryer.
 Make sure the lint filter is properly attached before operation, and do not remove it during
operation.
Improper attachment or removal will result in water leakage.
 Do not apply excessive pressure to the door bellows when loading or unloading laundry.
Doing so may warp the door bellows and result in water leakage.
 Do not open the detergent case lid during operation.
Doing so may result in steam or water leakage.
 Do not remove the dry filter during drying operations.
Doing so may result in steam or water leakage or burns.
 Do not place your hands and feet under the washer dryer during operation.
Doing so may result in injuries.
 Do not touch the metallic parts of the drum or door, the top right portion of the washer
dryer, or the laundry (zippers, metallic buttons, etc.) during or after drying operations.
Doing so may result in burns.
CAUTION
(P.8)
5