Table of Contents
Advertisement
Battery Pack Installation
4.6 Securing battery pack to wall
Secure the battery pack to a wall to prevent it from moving. If the battery pack is installed
above the floor or on a platform, make sure that the wall or platform is capable of supporting
the battery pack's weight.
NOTE
It is allowed to use any other type of fastening suitable for the wall material.
24
1. Determine where the mounting brackets are to
be placed using the drill template.
2. Drill holes in the wall for the M6 (0.25 in)
screw anchors. The drilling depth should be at
least 50 mm.
3. Drive the screw anchors through the mounting
brackets into the holes.
4. Tighten the screws to a torque of 5 N·m.
5. Remove the top cover.
Advertisement
Table of Contents
