Servicing The Battery; Replacing A Fuse - Toro Reelmaster 7000-D Operator's Manual

Servicing the Battery

Service Interval: Every 50 hours
Note:
Keep the terminals and the entire battery case
clean because a dirty battery will discharge slowly.
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Open the battery-compartment cover; refer to
Accessing the Battery Compartment (page
3. Check the condition of the battery.
Note:
Replace a worn or damaged battery.
4. Disconnect the battery cables, and remove the
battery from the machine; refer to
the Battery (page
5. Wash the entire battery case with a solution of
sodium bicarbonate (baking soda) and water.
6. Rinse the case with clean water.
7. Assemble the battery to the machine and
connect the battery cables; refer to
the Battery (page
8. Close and latch the battery-compartment cover.

Replacing a Fuse

The fuse block is in the battery compartment.
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Open the battery-compartment cover; refer to
Accessing the Battery Compartment (page
3. Replace the open fuse
fuse type and amperage rating.
41).
Disconnecting
52).
Connecting
52).
41).
(Figure 88) with the same
42).
1. Fuse block
42).
4. Close and latch the battery-compartment cover.
53
Figure 88
2. Maxi fuse socket
g369853
g372876