Heat Sink; Removing The Heat Sink; Installing The Heat Sink - Dell OptiPlex 3000 Thin Client Service Manual

Heat sink

Removing the heat sink

Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
Steps
1. In reverse sequential order (as indicated by the numbers on the heat sink), loosen the four captive screws that secure the
heat sink to the system board.
2. Lift the heat sink off the system board.

Installing the heat sink

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the installation procedure.
Removing and installing components 33