Dell OptiPlex 3000 Thin Client Service Manual page 56

Table 12. System setup options—Passwords menu (continued)
Passwords
Enable Master Password Lockout
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
Table 13. System setup options—Update, Recovery menu
Update, Recovery
UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
Dell Auto OS Recovery Threshold
Table 14. System setup options—System Management menu
System Management
Service Tag
Asset Tag
Wake on LAN/WLAN
Auto On Time
SERR Messages
First Power On Date
Diagnostics
56 BIOS setup
When enabled, this will disable the master password support.
By default, the option is disabled.
Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.
By default, the option is disabled.
Enable or disable BIOS updates through UEFI capsule update packages.
By default, the option is enabled.
Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.
By default, the option is enabled.
Enable or disable the flashing of the computer firmware to previous revision is
blocked.
By default, the option is enabled.
Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.
By default, the threshold value is set to 2.
Displays the Service Tag of the computer.
Create a computer Asset Tag.
Enable or disable the computer to power on by special LAN signals when it
receives a wake up signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Enable or disable SERR messages.
By default, the option is enabled.
Set Ownership Date.
By default, the option is disabled.