Next steps
1. Install the
WLAN
card.
2. Install the
side
cover.
3. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
speaker
.
4. Remove the
solid-state drive
5. Remove the
memory
.
6. Remove the
WLAN
card.
7. Remove the
heat
sink.
About this task
The following image indicates the connectors on your system board.
1. Speaker cable
3. Optional video connector (HDMI/VGA/DP port)
5. Optional PS/2 keyboard/mouse module connector
7. WLAN card connector
42
Removing and installing components
after working inside your
before working inside your
assembly.
computer.
computer.
2. Coin-cell battery
4. Optional I/O cable connector (USB 3.2 Gen 1 Type-C port
with DisplayPort Alt mode)
6. Memory module slots
8. M.2 2230 solid-state drive connector