Advertisement
Screen Saving
1. In the state of off and non screen saving, keep pressing
and
for 5s to set screen saving time, which will be shown
after the top-left colon 88 statically. Press up/down key to
adjust screen saving time and press function key to confirm.
2. Screen saving time should be 0s (backlight always on when
wired controller is on), 15s, 30s, 60s, default value is 15s.
If it is not the first time of setting, it will display the screen
saving time adjusted last time.
3. In the process of changing screen saving time, press ON/
OFF key to quit screen saving time setting function, it will
recover to screen saving time before adjustment and start-
up the unit.
4. Switch on the unit, the backlight is burning. Switch off the
unit, the backlight is off. The leaf icon is on after switching
on the unit (whatever backlight is on/off). The leaf icon is off
after unit is off.
5. For the convenience of adjusting clock,the backlight is on if
wired controller is off after powering on, when switch on the
wired controller and then switch off,the backlight will be off
normally.
6. Under Off state, the backlight is activated only if you press
any key except ON/OFF key, no more operation executed,if
press ON/OFF key,wired controller switch on directly. The
unit is switched on and the backlight is activated once you
press any key include ON/OFF key.
10
Advertisement
