Advertisement
Health
1. Press function key and up/down key to shift to
flashes, and then press function key again to confirm the
setting. If health is set, execute the above operation to
cancel the health.
2. The health function will be kept once the wired controller is
switched on again and mode changing when it has been
set. Health function will valid only when SW4 is OFF and
invalid when it is ON.
Sleeping
1. Choose
press function key to confirm. 8h is displayed (8 hour is
default, or others if you ever set it). You can adjust the time
by up/down keys. The range is 1h-8h, after adjustment,
press function key again to confirm this setting. The
sleeping time disappears after 3 seconds. Then the set
temperature/ ambient temperature is displayed. You need
shift to the sleeping function if you want to see the sleeping
time,the time is displayed automatically. You can cancel the
sleeping function with the same operation.
2. Sleeping function is valid when SW4 is OFF and invalid
when SW4 is ON.
function by function and up/down keys, then
and it
20
Advertisement
