Advertisement
The swing function exit:
Pressing Fan key or Mode key can both exit swing function;
After adjusting angle of swing, press function key to confirm
the angle and exit the swing function; In the adjustment
process, if there is no key pressed for 10s, swing function
will be exited, and swing angle will execute the final
adjusted angle. In the adjustment process, pressing the
ON/OFF key to power off the wired controller directly, and
swing angle is the final adjusted swing angle.
Filter Cleaning
When filter cleaning icon displays, press function key ,then
press up/down key to activate
remove filter cleaning icon.
Fresh
1. Choose fresh by function and up/down keys, when the
icon flashes, press function key to confirm, then the icon
displays statically. Do same operation again to cancel fresh
function.
2. After you set fresh, it is switched off together with off
commend from wired controller. fresh will be kept once the
unit is switched on . You can set the fresh under unit off
state and keep it when the unit is switched on again. It will
not disappear when changing mode.
3. Fresh is in function cycle only when SW4 is OFF.
, then press function key to
18
Advertisement
