Mitsubishi Electric MELSEC Q Series User Manual page 20

CPU type
Universal model QCPU
Safety CPU
C Controller module
*1
*2
*3
Remark
When using a C Controller module, refer to the following.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to the QJ61CL12 and quantities for
each network module model.
Depending on the combination with other modules or the number of mounted modules, power supply capacity
may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the power supply capacity is
insufficient, change the combination of the modules.
Applicable CPU module
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
*1
*2
Remark
The Basic model QCPU or C Controller module cannot create the MELSECNET/ H remote I/O network.
18
Downloaded from ManualsNet.com
Applicable CPU module
CPU model
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
QS001CPU
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
The number varies depending on the I/O points of the CPU module and the number of occupied I/O points set in
QJ61CL12.
Can be installed to any I/O slot of a base unit.
Connection of extension base units is not available with any safety CPU.
C Controller Module User's Manual (Hardware Design, Function Explanation)
No. of modules (*1)
Limited within the range of I/O points for the network module.
Can be installed to any I/O slot of a base unit.
search engine
No. of
modules (*1)
Up to 64
N/A
Up to 64
Main base unit of
remote I/O station
Up to 64
Base unit (*2)
Main base unit Extension base unit
×
: Applicable, ×: N/A
No. of modules (*2)
Extension base unit of
remote I/O station
: Applicable, ×: N/A
× (*3)