Husqvarna BG 250 Operator's Manual page 47

To control the operation direction
During operation, the product can pull to the sides. The
direction of the pull is related to the direction of rotation
of the grinding head and how the product is operated.
• Always keep the 2 wheels on the ground during
operation of the product.
• Apply the side forces on the handle to steer the
product.
• Always hold the handle tightly with 2 hands to stay
stable and make sure that the product does not
move laterally.
To stop the product BG 250
CAUTION:
from the surface when you stop the motor.
The tool plates rotate for a while after the
motor stops. Dust can go into the air and the
surface can become damaged.
CAUTION:
become stationary until the tool plates stop
fully.
1. Push the emergency stop button (A).
A
C
2. Keep the tool plates against the surface until they
stop fully.
3. Push the startup support lever (B) rearward, to lift
the diamond tools from the surface.
CAUTION:
asphalt, paint or equivalent material,
the product can attach to the adhesive
surface. Immediately after the tool plate
stopped fully, lift up the front of the
product a small distance.
1802 - 002 - 13.04.2022
Do not lift the grinding head
Do not let the product
B
If you grind adhesive
4. Disconnect the power plug.
5. Remove the key (C) of the operator presence control
from the product.
6. Stop the dust extractor.
To stop the product BG 250Petrol
CAUTION:
from the surface when you stop the engine.
The tool plates rotate for a while after the
engine stops. Dust can go into the air and
the surface can become damaged.
CAUTION:
become stationary until the tool plates stop
fully.
1. Push the throttle control (A) forward to stop position.
A
B
D
2. Push the emergency stop button (B).
3. Keep the tool plates against the surface until they
stop fully.
4. Push the startup support lever (C) rearward, to lift
the diamond tools from the surface.
CAUTION:
asphalt, paint or equivalent material,
the product can attach to the adhesive
surface. Immediately after the tool plate
stopped fully, lift up the front of the
product a small distance.
5. Remove the key (D) of the operator presence control
from the product.
6. Close the fuel valve.
7. Stop the dust extractor.
Do not lift the grinding head
Do not let the product
C
If you grind adhesive
47