Maintenance - Husqvarna BG 250 Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
General product maintenance
Clean the product.
Do a check of all safety devices.
Make sure that nuts and screws are tight.
Do a check of the electrical components, the ca-
bles and the connections for wear and damages.
Do a check of the hose connections. Do a check
of all hoses on the product for damages or leak-
age.
Make sure that the dust hoses are not damaged
and free of blockage.
Make sure that the dust collector is empty and
connected correctly.
Do a check of the grinding disc and the flexible
coupling for damages and wear.
Do a check of the emergency stop button.
Do a check of the brush strip.
Motor maintenance BG 250
Make sure that the power cord and extension ca-
ble are in good condition and not damaged.
48

Maintenance

Before you do
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
First
Daily
month or
after 20 h
X
X
*
*
*
*
*
*
X
X
First
Daily
month or
after 20 h
*
Each 3
Each 6
months or
months or
50 h
100 h
Each 3
Each 6
months or
months or
50 h
100 h
1802 - 002 - 13.04.2022
Each year
or 300 h
Each year
or 300 h

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bg 250petrol

Table of Contents