Technical Specifications; Safety Information - Silvercrest SDI 2800 D4 Operating Instructions Manual

Technical specifications
Power supply
Total rated power
Rated power of left induction field 1
Rated power of right induction field 3
Protection class
Noise emission level

Safety information

WARNING! RISK OF ELECTROCUTION!
Make sure that the mains cable never gets wet or damp when
►
the appliance is in use. Route the cable so that it cannot be
trapped or damaged in any way.
Ensure that the mains plug is connected exclusively to a
►
properly installed, easily accessible mains socket that has a
voltage corresponding to the specifications on the rating
plate. The mains socket must remain easily accessible after
the appliance is plugged in.
After use, always disconnect the plug from the mains power
►
socket. When unplugging the appliance, always pull on the
plug, not the mains cable.
Simply switching off the appliance is not sufficient because
►
mains voltage is still present in the appliance as long as the
mains plug is in the mains socket.
■ 4 │ GB │ IE │ NI │ CY
This mark confirms that the product complies with the product safety
requirements applicable in the UK.
220 - 240 V ~ , 50/60 Hz
2800 W
1800 W
1000 W
II / double insulation
<70 dB (A)
SDI 2800 D4