NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
Procedure
1. Loosen the captive screw that secures the base cover to the palm-rest assembly.
2. Remove the nine screws (M2.5x5) that secure the base cover to the palm-rest assembly.
3. Using a plastic scribe, pry the base cover off the palm-rest assembly.
4. Lift the base cover off the palm-rest assembly.
Removing the base cover
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Removing the base cover
3
11