NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
base
cover.
Procedure
1. Disconnect the speaker cable from the system board.
2. Lift the left speaker off the palm-rest assembly.
3. Remove the speaker cable from the routing guides on the battery.
4. Peel off the tape that secures the speaker cable to the palm-rest assembly.
5. Lift the right speaker off the palm-rest assembly.
24
Removing the speakers
Removing the speakers
computer. After working inside your computer, follow the instructions in
13
After
www.dell.com/