Chapter 28: Replacing The Status-Light Board; Procedure; Post-Requisites - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Place the status-light board in the slot on the palm-rest assembly and snap it into place.
2. Slide the status-light board cable under the speaker cable.
3. Connect the status-light board cable to the system board.
Post-requisites
1. Replace the battery.
2. Replace the base cover.
50 Replacing the status-light board
Replacing the status-light board
computer. After working inside your computer, follow the instructions in
28
After
www.dell.com/