NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
base
cover.
Procedure
1. Locate the wireless card on the I/O board and then lift the Mylar from the wireless card.
2. Remove the screw (M2x3) that secures the wireless-card bracket and wireless card to the keyboard bracket.
3. Lift the wireless-card bracket off the wireless card.
4. Disconnect the antenna cables from the wireless card.
5. Slide and remove the wireless card from the I/O board.
28
Removing the wireless card
Removing the wireless card
computer. After working inside your computer, follow the instructions in
17
After
www.dell.com/