Table of Contents
Advertisement
13. OPERATING PROCEDURES
NOTES:
1. To print NET WT. data, from the FIX mode, load a label which has an area to print a NET WT.
Statement.
2. The quantity sold number and price data in NET WT. statement operation will be accumulated
in the memory. No weight data will be accumulated.
3. The position of the decimal point is adjustable and a comma or period is selectable by the initial
setting.
4. Weight data is shifted to the left.
5. Weight data exceeding 480 oz results in an error.
6. Unit price calculation system
(Step 1) Weight data is calculated from royal lb into decimal lb.(Round off the data to two
decimal places.)
ex.) 21 oz → 1.3125 lb → round → 1.31 lb
(Step 2) Price is divided by the value obtained above.
(Round off the data to two decimal places.)
ex.) 1.5 $/1.31 lb = 1.145 → round → $1.15/lb
7. When the unit price is less than $0.01/lb or either the weight or price is 0, the unit price will not
be printed.
8. Multiplication registration of NET WT. statement
The maximum quantity of a commodity is 99.In the following cases, an error occurs when
pressing the
(1) Quantity = 0
(2) Price × quantity > max. price
13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY)
PRT/*
key to issue the label.
(Sample label)
13- 10
This data is printed.
Advertisement
Table of Contents
