Table of Contents
Advertisement
13. OPERATING PROCEDURES
13.8
CALLING AND PRINTING LOGOS
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
When the initial set #10-7 is set to "1" or "2", a logo containing a picture, a mark, a POP message, etc.,
can be printed on the ingredient label having 12 lines or more.
Logo data is created on the PC and stored into the memory through the CMT/PL-3 interface.
Press:
Enter the logo #.
(1 to 26 or 1 to 99)
Press:
NOTES:
1. The logo # will be effective until it is changed or deleted.
(Logo # is still effective after turning the power off and/or changing mode.)
2. Pressing the
This clears the unit price and tare data.
3. LOGOs will not be printed together with a safe handling instruction on a label.
4. LOGOs will be printed in the center of a label.
5. LOGO # "1 to 26" or "1 to 99" is selectable with the initial setting #10-7.
LOGO
1
PRT
*
Start the label issue operation.
PRT/*
key returns the display to the initial display of weighing mode.
Select the LOGO type
◇
(LOGO (1)
LOGO (2)
0
or
0
13- 13
13.8 CALLING AND PRINTING LOGOS
F.Shopper).
Clear the entered
C
logo #.
Advertisement
Table of Contents
