Table of Contents
Advertisement
13. OPERATING PROCEDURES
13.6
TARE/SAVE FUNCTION PROCEDURES
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.)
There are two kinds of tare subtraction procedures, one is "Direct tare", the other is "Preset tare "The
SAVE
key is used to save the tare, unit price, and PLU data after taking a commodity from the platter.
Place a container on the
platter.
(Ex. 0.200 lb)
Press:
Enter the PLU #.
Press:
The PLU data and tare are
saved.
Place a commodity into the
container.
(Ex. 1.000 lb)
MANUAL:
PRT
*
Press:
Remove the commodity
together with the container.
NOTES:
1. Tare subtraction is available up to 4.00 lb. for the US type, and up to 2.000kg (4.00lb) for the CA type. When tare
subtraction is in operation, however, the scalable range for net weight becomes less by the amount of the tare. (Net
weight=Gross weight-Tare)
2. Preset tare must be a multiple of 5 g for CA type (Kg scale) and a multiple of 0.01 lb for US/CA type (Lb scale).
3. The tare % function is available when the Initial Setting #28-4 is set to 1. The speed key #108 will function as the % key
(Refer to page 5-3). Set a tare % within the range from 0.0 to 99.9.
4. When a commodity is placed on the platter and the calculated tare exceeds the maximum, a "TARE WEIGH OVER"
error will occur.
0.200 lb
T
1
0
0
PLU
SAVE
:AUTO
The label is issued.
C
2
0
0
T
Tare %
%
1
0
0
%
13- 11
13.6 TARE/SAVE FUNCTION PROCEDURES
Tare %
1
Press:
Place a container on
the platter
Remove the Commodity
together with the container.
Press:
C
CA type
US type
PLU
Press:
0
0
%
Press:
0
Press:
T
PLU
Press:
Advertisement
Table of Contents
