Fujitsu ScanSnap iX1400 Basic Operation Manual page 101

HINT
To continue using the ScanSnap, reset the time until auto power-off by performing one of the following:
l Insert a document in the ScanSnap
l Press the [Scan/Stop] button on the ScanSnap
l Close the feed guide and open it again
SV600
To turn the ScanSnap back on, perform one of the following operations:
l Press the [Scan] button on the ScanSnap (this will not start scanning)
l Press the [Stop] button on the ScanSnap.
HINT
To continue using the ScanSnap, reset the time until auto power-off by pressing the [Scan] button on
the ScanSnap.
Changing the ScanSnap's Power Settings
iX1600/iX1500
1. Press in the
screen.
2. Press
3. Press [Automatic power off] to display the [Automatic power off] screen.
4. Press the setting field for [ScanSnap will automatically power off] to display a list.
5. Change the setting.
6. Press to return to the home screen.
iX1400/iX500/iX100/SV600/S1300i
You can change the time of the ScanSnap to turn off automatically or change the setting so that it
will not turn off automatically. Set according to the following procedures:
1. Right-click the ScanSnap Manager icon
from the "Right-Click Menu" (page
a The [ScanSnap Manager - Preferences] window appears.
2. In the [Power] list, change the settings for [Power setting] based on how it is connected.
home screen on the touch panel of the ScanSnap to display the [Settings]
to display the [Scanner settings] screen.
87).
in the notification area and select [Preferences]
101
Turning the ScanSnap On or Off