Using A Dns Server For The Internet Connection (Ix1600 / Ix1500) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Using a DNS Server for the Internet Connection (iX1600 / iX1500)

When an IP address is set for the ScanSnap, the setting for using a DNS server can be configured
on the ScanSnap.
1.
Press in the
display the [Settings] screen.
2.
Press
3.
Press [Access point connection] to display the [Access point connection]
screen.
4.
Press [DNS Server] to display the [DNS Server] screen.
5.
Turn on [Use of DNS Server].
6.
Press the input field for [Primary DNS], enter the IP address of the primary
DNS server, and then press [OK].
7.
Press the input field for [Secondary DNS], enter the IP address of the
secondary DNS server, and then press [OK].
8.
Press to return to the home screen.
home screen on the touch panel of the ScanSnap to
to display the [Wi-Fi settings] screen.
Access Point Connect Settings (iX1600 / iX1500)
167