Fujitsu ScanSnap iX1400 Basic Operation Manual page 440

ATTENTION
Connect the power cable to the AC outlet only when cleaning the feed rollers and eject
rollers.
2. Clean the following locations with a cloth moistened with Cleaner F1.
l Feed roller (× 2)/eject roller (× 2)
Press the [Scan] button to rotate the rollers. Gently wipe the dirt and dust off while
taking care not to damage the surface of the roller. Make sure that they are cleaned
properly because residue on the rollers will affect the feeding performance.
HINT
Pressing the [Scan] button seven times will rotate the feed rollers and the eject rollers
one revolution.
7.
Close the ADF top section.
Close the ADF top section until it locks in place.
The body of the ScanSnap may vary in color depending on the region where you purchased
the ScanSnap.
440
Cleaning iX1600 / iX1500 / iX1400
Feed Roller (x2)
Eject Roller (x2)