Hitachi EP-L110E Instruction Manual page 37

5
Attach the unit cover
Insert the tab of the unit cover into the hole
of the dust box.
Press down the tab of the unit cover and
close the cover.
6
Attach the auto self clean unit
Insert the protruding portion below the auto self clean unit into the hole of the auto self clean unit attachment area.
Slide the lock button until a clicking sound is heard and then attach the auto self clean unit.
CAUTION
Do not install the auto self clean unit tilted. It may cause an abnormal sound or malfunction.
Protruding portion below the auto self clean unit
Hole of auto self clean unit attachment area
7
Attach the rear panel
8
Insert the power plug into the outlet and
press the
After discarding the dirt, make sure that the "Empty Dust"
indicator is not lit.
(The humidifying operation time is reset when the power cord
is unplugged only if the "Filter Cleaning" indicator is lit.)
CAUTION
When setting Auto Self Clean, be sure to attach the auto self clean unit.
When using the product with the auto self clean unit removed, do not set Auto Self Clean.
If the Auto Self Clean operation is run with the auto self clean unit removed, the operation sound
becomes louder for several minutes while trying to detect the auto self clean unit.
(P.E-15)
power button.
Tab of unit cover
Tab of unit cover
Lock button
Attach the auto self
clean unit horizontally.
Make sure that the indicator is not lit.
(P.E-26)
E-37