Rear Panel, Etc - Hitachi EP-L110E Instruction Manual

5
Attach the unit cover
6
Attach the auto self clean unit
7
Attach the rear panel

Rear panel, etc.

 Clean the rear panel and other parts of the main unit frequently because dust and dirt get on them.
1
Confirm that operation has been stopped and then remove the power
plug from the socket.
If the product is operating, press the
2
Remove the rear panel
3
Remove the auto self clean unit
4
Clean the rear panel
Clean the drive part as well.
Remove dust using a vacuum cleaner or commercially-available dust
remover.
When using a vacuum cleaner, lightly tap the nozzle brush. On small
concave areas, remove dust by lightly scrubbing the areas with a soft
toothbrush.
If the part is extremely dirty, wipe it with a soft cloth after wetting it and
ringing it out.
Clean areas around the pre-filter and rear case as well.
Rear case
5
Attach the auto self clean unit
6
Attach the rear panel
(P.E-37)
(P.E-15)
(P.E-14)
Pre-filter
(P.E-15)
(P.E-37)
power button to stop operation.
(P.E-36)
(P.E-37)
Nozzle brush
Drive part
E-39