Table of Contents
Advertisement
Troubleshooting Guide
When a notifi cation is displayed on the temperature/humidity monitor
Notifi cation Display and Details
The fi lter assembly is not set.
The humidifying fi lter is not set.
The rear panel is not attached.
The vibration sensor has
detected something.
Fan is not rotating.
Note: If the problem cannot be solved, request repair.
Install the fi lter assembly.
If the same message appears, the fi lter assembly may be deformed and cannot be used.
Replace the fi lter assembly.
Install the humidifying fi lter.
Attach the rear panel properly.
Plug the tabs (2 locations) of the upper part of the rear panel and press the left and right
parts of the lower part until a clicking sound is heard.
Unplug from outlet and plug it again.
If the unit fell over and water from the tank is leaking, make sure to unplug it from the out-
let and request repairs.
Unplug from outlet and plug it again.
If the same message appears, discontinue use, make sure to unplug it from the outlet,
and request repairs.
Solution
(P.E-15)
E-45
Advertisement
Table of Contents
