Table of Contents
Advertisement
Chapter 3 Starting Up
3.1 Installation Procedure
This chapter describes the steps from installation to startup of the FX700 main unit.
3.1
Installation Procedure
This section describes the installation procedure. See and read
thoroughly before performing the work.
1.
Decide on the installation site of the FX700 main unit.
See
"3.2 Installation
Cut-Off
2.
Open the package, and check for any visible damage that may have occurred during shipping.
3.
Check whether the delivered goods match the details printed on the invoice.
See
"3.7 Unpacking the FX700 Main
Confirm that you have all the required manuals. If necessary, print the PDF files. For details on the
series of FX700 system manuals, see
Remarks
Separately ordered components may be delivered separately from the FX700 main unit.
4.
Install the rack rails on the rack.
See
"3.8.1 Installing the Rack Rails on the
5.
Install the FX700 main unit in the rack.
See
"3.8.2 Mounting the Chassis in the
6.
Do the wiring of the FX700 main unit.
See
"3.15.1 Precautions on Connecting/Disconnecting
7.
Connect the FX700 main unit to the main power supply.
See
"3.15.3 Connecting the Power
8.
The FX700 main unit has buttons and LEDs at the front and rear. Learn in advance about the
buttons and the meanings of the LED states.
See
"1.2 Buttons and LEDs on the FX700 Main
9.
Make the initial BMC settings for the FX700 main unit.
See
"3.16 Powering On for the First
10. Install the OS and drivers.
See
"3.17 Installing the
Chapter 3 Starting Up
Specifications,"
Characteristics," and
"3.5 Installation Area and Service
OS" and
"Chapter 2 Important
"3.3 Installation
Environment,"
Unit."
"Manuals in This
Series" shown in "Preface."
Rack."
Rack."
Cables."
Cord."
Unit."
Time."
"3.18 Installing the InfiniBand
21
Information"
"3.4 Distribution Panel
Areas."
Driver."
C120-0089-03EN
Advertisement
Table of Contents
