Table of Contents
Advertisement
Chapter 3 Starting Up
3.8 Mounting the Chassis in the Rack
3.8
Mounting the Chassis in the Rack
The following is the procedure for mounting the chassis in the rack.
3.8.1
Installing the Rack Rails on the Rack
The following is the procedure for installing the rack rails on the rack.
1.
Prepare the necessary parts.
Left rail x 1
Countersunk head screw x 8
2.
Loosen the four Phillips screws each on the left and right rails.
Figure 3.7 Parts for Rack Rail Installation
Left support bracket x 1
Washer x 4
Right rail x 1
Right support bracket x 1
Pin (Diameter: Φ6.7) x 2
34
Flat plate x 2
M5 screw x 4
C120-0089-03EN
Advertisement
Table of Contents
