Installing/Removing The Blade; Installing The Blade In The Chassis - Fujitsu PRIMEHPC FX1000 Operating Manual

Chapter 3 Starting Up
3.9 Installing/Removing the Blade
3. Install the left and right back plates onto the rack.
4. After mounting the chassis, install all the units.
For details on how to install each unit, see
Installing the PSU in the
Installing the Dummy Blade in the
3.9

Installing/Removing the Blade

3.9.1

Installing the Blade in the Chassis

The following is the procedure for installing the blade in the chassis.
1.
Install the blade in the chassis.
Figure 3.18 Installing the Back Plates
M5 screw x 2
"3.9.1 Installing the Blade in the
Chassis," "3.13.1 Installing the FANU in the
Chassis."
40
Support bracket
Chassis,"
Chassis," and
C120-0089-03EN
"3.10.1
"3.11.1