Using The Sterilization Station (Sterilization And Charging) - LG VH92 DSWG Series Owner's Manual

How to use

Using the Sterilization Station (Sterilization and Charging)

1
The plug of sterilization station must
➊
be plugged into outlet to use the
sterilization station.
※ If you do not use the cleaner for a long time, turn off the switch to reduce battery discharge.
10
2
UV lamp status display
When the product is correctly
➋
placed on the sterilizer station, a
blue indicator lights on the UV lamp
status screen and the UV lamp
starts operation for sterilization.
The indicator and the UV lamp are
turned off 5 minutes after placing
the product on the sterilizer station,
and sterilization stops.
3
Battery fully charged
5 minutes later the UV lamp and UV
➌
lamp status display automatically
turns off at the same time.
Then, sterilization operation is
complete and the product will be
charge state.
You can check the battery level
through battery level indicator.
When charging is completed, the
battery level indicator will be turned
on completely.
5 minutes later the battery level
indicator will be turned off.
The switch must be turned on in order
to charge the product.